Klegg ndu10-160 Reference Guide
User Manual
Klegg Electronics Inc.
31
www.klegg.com
Chapter 8 Formatting NDAS Device
8.1 Initialize NDAS Device
1. Right click My Computer and select Manage.
2. Computer Management window will appear. Click Disk Management under
Storage.
Storage.
3. Computer Management window will list all
the disks in the computer.
4. Find the NDAS device you want to initialize.
- The NDAS device is usually indicated
by Not Initialized.
- If the NDAS device is described as Basic or Healthy, skip to Chapter 9.2 Partition
NDAS Device. Otherwise, go to next step.
5. Initialize NDAS Device
- Right click on the Disk # that pertains to your
NDAS device and select Initialize Disk.
- Initialize Disk window will
appear. Select the NDAS device and
click OK.
6. NDAS device will be automatically initialized.
- Unknown becomes
Basic.
Basic.
Note: It is VERY important that your NDAS Device is listed as a Basic Disk
and not a Dynamic one.
and not a Dynamic one.
7. Initialization is completed.
- Before NDAS device can be used, it must be partitioned. See Chapter 9.2.