Lantronix 92000 User Guide

 11 

It is necessary to follow the cable specifications below when connecting the switch to 
your network. Use appropriate cables that meet your speed and cabling requirements. 

10BaseT RJ-45 

10/20 

Mbps 

2-pair UTP/STP Cat. 3, 4, 5  100 m 

100BaseTX  RJ-45 

100/200 Mbps 

2-pair UTP/STP Cat. 5 

100 m 

100BaseFX  SC, ST, VF-45, MT-RJ  100/200 Mbps 

MMF (50 or 62.5µm) 

2 km 

100BaseFX  SC 

100/200 Mbps 

SMF (9 or 10µm) 

15, 40, or 75 km 

1.  First, ensure the power of the switch and end devices is turned off. 

2. 

Always ensure that the power is off before any installation.  

3.  Prepare cable with corresponding connectors for each type of port in use. 

4. 

 To connect two regular RJ-45 ports between switches or hubs, you need a 

cross-over cable. 

5.  Consult the previous section for cabling requirements based on connectors and 

speed. 

6.  Connect one end of the cable to the switch and the other end to a desired device. 

7.  Once the connections between two end devices are made successfully, turn on the 

power and the switch is operational.