Bosch ltc-0335-28 Installation Instruction
34
en | Configuring devices
Bosch Video Management System
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Sicherheitssysteme GmbH
3.
Click
to save the settings.
4.
Click
to activate the configuration.
6.23
Adding a LUN
Main window >
Devices > Expand
> Expand
Usually the network scan adds the desired iSCSI devices with their targets and LUNs
automatically. If your network scan did not work correctly or you want to configure your iSCSI
device offline before it is actually integrated into your network, you configure a target in your
iSCSI device and on this target you configure one or more LUNs.
To configure:
1.
Right-click
and click Add Target.
The Add Target dialog box is displayed.
2.
Enter the desired target number and click Ok.
The target
is added.
3.
Click the new target.
The LUNs page is displayed.
4.
Click Add.
The Add LUN dialog box is displayed.
5.
Enter the desired LUN number and click Ok.
The LUN is added as a new table row.
Repeat this step for each desired LUN.
Notes:
–
To remove a LUN, click Remove.
The video data remains on this LUN.
–
To format a LUN, click Format.
All data on this LUN is removed!
6.24
Formatting a LUN
Main window >
Devices > Expand
> Expand
> Expand
>
You format a LUN to prepare it for the first use.
To configure:
1.
On the LUNs page, select the desired LUN and, in the Format column, click to check.
2.
Click Format LUN.
3.
Read the displayed message carefully and confirm the message if desired.
The selected LUN is formatted. All data on this LUN is lost.
NOTICE!
All data on the LUN is lost after formatting.