Bosch ltc-0335-28 Installation Instruction

Bosch Video Management System

 Configuring NVRs | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

3.

Click the Camera Storage tab to define minimum and maximum storage times, manage 

protected recordings, and to optionally schedule the backup of the assigned cameras.

If scheduled backups are desired, you must first create a Task Schedule in Schedules.

Main window > 

 Devices > Expand 

 > Expand 

 > 

 

To configure a Failover NVR you must first change an NVR to a Failover NVR.

1.

Right-click an NVR.

This NVR must not have any encoders assigned.

2.

Click Act as Failover NVR.

The NVR is moved to the Failover NVRs node.

Main window > 

 Devices > Expand 

 > Expand 

 > 

 

To configure a Redundant NVR you must first change an NVR to a Redundant NVR.

1.

Right-click an NVR.

This NVR must not have any encoders assigned.

2.

Click Act as Redundant.

The NVR is moved to the Redundant NVRs node.

Main window > 

 Devices > Expand 

 > Expand 

 > 

Before you can configure a Failover NVR you must switch a Primary NVR to a Failover NVR.

After having configured a Failover NVR, you assign it to one or multiple NVRs.

You can perform the following tasks to configure a selected Failover NVR:

–

Configuring video and audio storage

–

Assigning NVRs 

1.

Click the Global Settings tab to display network settings of the selected Failover NVR.

2.

Click the Disk Storage tab to configure the storage settings of the selected Failover NVR.

3.

Click the Assigned NVRs tab to add or remove NVRs to the selected Failover NVR

For detailed information on the various fields, see the Online Help for the appropriate 

application window.

Main window > 

 Devices > Expand 

 > Expand 

 > 

Before you can configure a Redundant NVR you must switch a Primary NVR to a Redundant 

NVR.

After having configured a Redundant NVR, you assign it to one or multiple NVRs.