Bosch ltc-0335-28 Installation Instruction
44
en | Configuring the structure
Bosch Video Management System
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Sicherheitssysteme GmbH
To create a camera sequence:
1.
In the Logical Tree, select a folder where you want to create the camera sequence.
2.
Click .
The Sequence Builder dialog box is displayed.
3.
In the Sequence Builder dialog box, click
.
The Add Sequence dialog box is displayed.
4.
Enter the appropriate values.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
5.
Click OK.
A new camera sequence
is added.
To add a step with a new dwell time to a camera sequence:
1.
Select the desired camera sequence.
2.
Click Add Step.
The Add Sequence Step dialog box is displayed.
3.
Make the appropriate settings.
4.
Click OK.
A new step is added to the camera sequence.
To remove a step from a camera sequence:
Right-click the desired camera sequence and click Remove Step.
The step with the highest number is removed.
To delete a camera sequence:
1.
Select the desired camera sequence.
2.
Click .
The selected camera sequence is removed.
8.7
Adding a camera sequence
Main window >
Maps and Structure
NOTICE!
When the configuration is changed and activated, a camera sequence (pre-configured or
automatic) usually is continued after restart of the Operator Client.
But in the following cases the sequence is not continued:
–
A monitor where the sequence is configured to be displayed has been removed.
–
The mode of a monitor (single/quad view) where the sequence is configured to be
displayed has been changed.
–
The logical number of a monitor where the sequence is configured to be displayed is
changed.
NOTICE!
After each of the following tasks:
Click
to save the settings.