Bosch ltc-0335-28 Installation Instruction

en | Configuring cameras and recording settings

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

4.

Under Alarm Recording, in the Stream column, select the stream that is recorded in case 

of an alarm. The settings in the next 2 columns are valid for the selected stream. 

Stream 2 is only selectable for encoders running ARM firmware.

In the Alarm Quality column, click a cell to select the stream quality of the selected 

stream.

In the Duration [s] column, click a cell and type the desired recording time before the 

alarm in seconds.

For detailed information on the various fields, see the Online Help for the appropriate 

application window.

Main window > 

 Devices > Expand 

 > Expand 

 > Expand 

 > 

 > Interfaces 

tab > Periphery tab

or

Main window > 

 Devices > Expand 

 > Expand 

 > 

 > Interfaces tab > 

Periphery tab

or

Main window > 

 Devices > 

 > 

 > Interfaces tab > Periphery tab

You can only configure port settings for an encoder where the control of the camera is 

available and activated.

When the encoder or PTZ camera is exchanged, the port settings are not retained. You must 

again configure them.

After a firmware update check the port settings.

1.

Make the appropriate settings.

The settings are valid immediately after saving. You do not have to activate the 

configuration.

For detailed information on the various fields, see the Online Help for the appropriate 

application window.

Main window > 

 Cameras and Recording > 

First configure the port settings of your PTZ camera before you can configure the PTZ camera 

settings. Otherwise the PTZ control is not working in this dialog box.

1.

In the Camera Table, select the required encoder. 

2.

To activate the control of a camera: In the 

 column, select the check box.

3.

Click the 

 button.

The dialog box for configuring PTZ settings is displayed.

4.

Make the appropriate settings.