Bosch ltc-0335-28 Installation Instruction
72
en | Configuring user groups
Bosch Video Management System
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Sicherheitssysteme GmbH
13.11
Configuring various priorities
Main window >
User Groups
You can configure the following priorities:
–
You can configure the priorities for acquiring PTZ controls and Bosch Allegiant trunk lines.
–
You can configure the alarm priorities for Live Mode and Playback Mode.
–
You can configure a time period for PTZ locking, i.e. a user with higher priority can take
over the camera control from a user with a lower priority and locks it for this time period.
To configure:
1.
In the User Groups tree, select a user group.
2.
In the Control Priorities field, move the slider for as required.
3.
In the Automatic Popup Behavior field, move the slider as required.
4.
Click the User Interface tab.
5.
In the Timeout in min. list, select the required entry.
13.12
Configuring camera permissions
Main window >
User Groups
You can configure various permissions for cameras, e.g. PTZ control.
You cannot change these settings for a default user group.
To configure camera permissions:
1.
In the User Groups tree, select a user group.
2.
Click the Priorities tab.
3.
Select or clear the check boxes as appropriate.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
13.13
Configuring decoder permissions
Main window >
User Groups
You can configure permissions for decoders.
You cannot change these settings for a default user group.
To configure decoder permissions:
1.
In the User Groups tree, select a user group.
2.
Click the Camera Permissions tab.
3.
Select or clear the check boxes as appropriate.
13.14
Configuring user interface settings
Main window >
User Groups
You can configure a multi monitor mode with up to 4 monitors. You set for every monitor what
is displayed on it, e.g. monitor 2 only displays Live Image panes.
To configure user interface settings:
1.
In the User Groups tree, select a user group.
2.
Click the Decoder Permissions tab.