Bosch ltc-0335-28 Installation Instruction

en | Devices page

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

Main window > 

 Devices > Expand 

 > 

 > Cameras tab

Displays a camera table of the cameras that are connected to the Bosch Allegiant device.

Displays the consecutive number of the camera.

Displays the logical number of the camera.

Displays the name of the camera.

Main window > 

 Devices > Expand 

 > 

 > Outputs tab

Allows you to configure the usage of a Bosch Allegiant device output and to assign an encoder 

to an output. 

To store the video data of a Bosch Allegiant device output in Bosch Video Management 

System, you must assign an encoder to the output. This encoder must be connected to the 

output.

Displays the number of the output.

Displays the logical number of the output within Allegiant.

Allows you to change the logical number of the output within Bosch Video Management 

System. If you enter an already used number, a message is displayed.

Displays the name of the output.

Allows you to change the usage of the output.

If you select Digital Trunk, you can assign an encoder to this output in the Encoder field. The 

Allegiant output becomes network-compatible.

If you select Allegiant Monitor, in the Operator Client the user can assign the camera signal to 

a hardware monitor. PTZ control is possible if the camera is configured as PTZ camera. In the 

Operator Client, the user cannot drag this camera on an Image pane.

If you select Unused, the user cannot assign a monitor to an Allegiant camera.

Allows you to assign an output to an encoder. You can only select an encoder when you have 

checked Digital Trunk. The encoder is locked for the Logical Tree. If you assign an encoder 

that is already in the Logical Tree, it is removed from there. In the Operator Client, the user 

can drag the camera to an Image pane.