Bosch ltc-0335-28 Installation Instruction
Bosch Video Management System
Devices page | en
101
Bosch Sicherheitssysteme GmbH
Configuration Manual
Configuration Client | V3 | 2010.07
Password: (for SMSC device only)
Type the password that the device needs to connect to the SMSC dial-up provider if required.
You get the information about the required entry from your provider.
Protocol: (for SMSC device only)
Select the required protocol that the device uses to connect to the SMSC dial-up provider.
You get the information about the required entry from your provider.
Recipient:
Type the mobile phone number of the recipient of the short messages. Include the country
prefix without + sign (e.g. 0049170123456).
Message (max. 160 chars):
Type the text for the short message.
SMS Test Message
Click to send a test short message.
17.16
POS + ATM page
Main window >
Devices > Expand
>
Allows you to add and configure peripheral devices, for example, a Bosch ATM/POS Bridge.
If you want to add multiple bridges at one server, you must use different ports.
17.16.1
Add Bosch ATM/POS-Bridge dialog box
Main window >
Devices > Expand
> Right-click
> Add Bosch ATM/POS-
Bridge command
Allows you to add a Bosch ATM/POS Bridge.
Name:
Type an appropriate name for the device.
IP address:
Type the IP address of the device.
Port 1:
Type the appropriate port number used for transmitting the keep alive signal (every 5
seconds).
Port 2:
Type the appropriate port number used for transmitting messages from the device.
17.16.2
Bosch ATM/POS-Bridge page
Main window >
Devices > Expand
> Expand
>
> Bosch ATM/POS-Bridge
tab
Allows you to configure a Bosch ATM/POS Bridge.
IP address:
Type the IP address of the device.