Lexmark 2580 Quick Setup Guide

Minimum—Sets the receive buffer size to zero

Maximum—For 2580/2581 models, sets the receive buffer size to 64KB or 480KB, depending on whether 

NLQ II

(Near Letter Quality) Download is enabled

Maximum—For 2590/2591 models, sets the receive buffer size to 47.5KB or 480KB, depending on whether
Download is enabled

Note: Maximum is the factory default setting.

Requires a line feed to occur.

On—A line feed is performed for each 

Carrier Return (CR) code received.

Off—A line feed does not occur when a CR code is received.

Note: Off is the factory default setting.

Requires a CR to occur.

On—A CR is performed for each line feed code received.

Off—A CR does not occur when a line feed code is received.

Note: Off is the factory default setting.

On—The zero (0) prints with a slash down the middle.

Off—The zero (0) prints without a slash down the middle.

Note: Off is the factory default setting.

Enabled—Reserves a portion of the receive buffer for downloading fonts

Disabled—Uses the entire buffer as a receive buffer

Note: Enabled is the factory default setting.

Enabled—Reserves a portion of the receive buffer for downloading fonts

Disabled—Uses the entire buffer as a receive buffer

Note: Enabled is the factory default setting.

Enabled—Substitutes code page 858 for 850 to allow older programs access to the European characters

Disabled—No code page substitution

Note: Disabled is the factory default setting.

Understanding Setup mode and menu options