Bosch ltc-0335-28 User Guide

Bosch Video Management System

 Displaying camera images | en

Bosch Sicherheitssysteme GmbH

Operator's Manual

Operator Client | V3 | 2010.07

2.

Drag the corner to resize the Image pane.

Main window

You can switch from the Image window to the Alarm Image window if at least one alarm is in 

the Alarm List.



In an Image window, click 

. 

The Alarm Image window is displayed.



In an Image window, click 

. 

Live Mode or Playback Mode is displayed depending on the Mode that was displayed 

before. 

Main window

You can start recording for each camera manually. The quality level of alarm recording mode is 

used. The duration of alarm recording is configured in the Configuration Client.

If the selected camera is already recording, the quality level is changed to alarm recording 

mode. The alarm recording can be protected when NVR recording is used. With VRM 

recording, the alarm recording is not protected.

Note: You cannot start manual recording for a DiBos camera.

1.

Select an Image pane displaying a camera.

2.

Click .

Recording is started.

NVR recordings only: The icon in the Image pane bar changes to 

. Click to stop recording. 

If you do not click to stop recording, manual recording stops after the configured manual 

recording time. In the Timeline of the camera, the manual recording is displayed as alarm 

recording.

VRM recordings only: You cannot manually stop recording. The recording stops after the 

configured alarm recording time. In the Timeline of the camera, the pre-alarm recording is 

displayed as alarm recording, if pre-alarm recording is configured in Configuration Client.

Main window 

With a camera sequence, a group of cameras are displayed one after the other. The pre-

configured camera sequences are configured in the Configuration Client and appear in the 

Logical Tree.

A map displayed in an Alarm Image pane is optimized for display and contains only the initial 

view of the basic 

.dwf file.