Bosch ltc-0335-28 User Guide

en | Displaying camera images

Bosch Video Management System

Operator Client | V3 | 2010.07

Operator's Manual

Bosch Sicherheitssysteme GmbH

2.

In the Camera menu, click Show Metadata....

A window is displayed with the available metadata. 

When you close the selected Image pane, the Metadata window is closed too.

Main window > 

You can use the Intercom functionality only when Live Mode is active.

Ensure that the microphone is active on your sound card and its volume is not 0. You perform 

this task in the Control Panel of your workstation computer. Additionally ensure that in the 

recording control of your sound card only the microphone is selected, not the stereo mix.

If you change the setting from stereo mix to microphone after the first start of Operator 

Client, the setting is overridden after the next start of Operator Client. Follow the steps in 

Section 14.2 Fixing the recording setting for Intercom functionality, page 69 to fix this behavior.

We recommend to use a headset instead of a microphone-loudspeaker combination to avoid 

acoustic feedback.

The Intercom functionality only works with an encoder that has both audio-in and audio-out. 

Ensure that the volume settings for the encoder microphone and loudspeakers are not 0. You 

perform this task in Configuration Client.

To use Intercom functionality on your workstation your user group must be granted to use it. 

You perform this task in Configuration Client.

In the Options dialog box, you can configure half duplex or full duplex mode.

1.

Select an Image pane with an audio encoder.

2.

Click 

 and hold the mouse button. If audio was off for this Image pane, it is switched 

on automatically.

The icon changes to 

.

Now you can talk. If configured, the other side can talk also, regardless whether the icon 

is clicked or not.

3.

Release the mouse button. The transfer is interrupted.

Audio remains on for this Image pane.

Main window > 

You can lock the control of a PTZ camera for other users. A user with a higher priority can take 

over the control and lock the camera control. A timeout can be configured for this explicit PTZ 

locking. If you only take over the control without manually locking it before, the control is 

locked for the user with lower priority for 5 seconds.

An incoming auto pop-up alarm can interrupt the transfer.