Bosch ltc-0335-28 User Guide
Bosch Video Management System
Using a CCTV keyboard | en
39
Bosch Sicherheitssysteme GmbH
Operator's Manual
Operator Client | V3 | 2010.07
10.3
Using a keyboard connected to a decoder
A keyboard connected to decoder gives you access to the Central Server without Operator
Client software. Hence, you must log on. Only the analog mode is available.
10.3.1
Starting the keyboard
After starting the keyboard you must log on to the Central Server.
To start the keyboard:
1.
Press the Terminal softkey.
The following logon display is shown:
2.
Enter the user name.
After successful logon, the Terminal and Keyboard Control softkeys are displayed in the
softkey display.
10.3.2
Displaying cameras
1.
Press Mon, press the number of the desired monitor, and press ENTER.
Monitor numbers are configured in the Configuration Client.
2.
Press the desired number of the camera and press ENTER.
The desired camera is displayed.
Example: Press Mon, 3, and ENTER. Then press 4 and ENTER. Camera 4 is displayed in
the 3rd analog monitor.
When the selected monitor displays a PTZ camera, the keyboard switches to PTZ mode
automatically.
NOTICE!
Only Bosch Video Management System users with number-only user names and number-only
passwords can use the analog mode of a CCTV keyboard.
The user must have access rights for the decoder connected to the CCTV keyboard.
User #
BOSCH VMS
_ _ _
Password
BOSCH VMS
_ _ _ _ _ _