Manualsbrain.com
  1. Manuals
  2. Brands
  3. JVC
  4. gy-hm750
  5. User Guide

JVC gy-hm750 User Guide

Download
Page of 138
125
The switch functions of the camera recorder can be 
configured using the remote control unit.
* Remote control units supported:RM-LP25U, RM-LP55U, 
RM-LP57U
1 
Connect the remote control unit to the camera 
recorder.
Connect the remote cable of the remote control unit to the 
[REMOTE] terminal on the terminal area of the camera 
recorder.
Note :                                                                                                
● Turn off the power of the camera recorder when 
                                                                                                    
connecting a remote control unit.
2 
Turn on the power of the camera recorder.
3 
Set the operate switch of the remote control unit to 
ON.
Memo :                                                                                 
● For details on functions that can be operated using the 
remote control unit, refer to [List of Remote Control Unit 
                                                                                                    
䡵Precautions for Using the Remote 
Control Unit
● When the switches of the camera recorder and remote 
control unit are operated at the same time, the switch 
operation of the remote control unit takes priority over that 
of the camera recorder.
● Focus and zoom operations cannot be performed using 
the remote control unit.
● The shutter speed may vary slightly from the value 
displayed on the camera recorder.
● When the frame rate in [Frame & Bit Rate] of the camera 
recorder is set to 
A24pB, the shutter speed cannot be set 
to 
A1/60B using the remote control unit. Even if the shutter 
speed is set to 
A1/60B, the actual speed is A1/48B. 
● When the camera recorder is in the Media mode, Auto 
White does not function even when it is operated using 
the remote control unit.
Remote Control Unit 
Connection
RM-LP25U
[REMOTE] Terminal