Audiovox dv1680 User Manual

You  can  connect  the  DVD  Player  to  any  audiovisual

equipment  from  the  DVD  Player's  output  terminals  of
DVD  Player.  You  can  also  connect  any  audiovisual
equipment to the DVD Player's input terminals.

To  switch  the  DVD  Player's  signal  source  between

input  and  output,  adjust  the  Input/Output  switch(IN
OUT).

Set the switch to the OUT position, to transmit signals

from the DVD Player to other equipment.

Set the switch to the IN position for the DVD  Player to

receive signals from other equipment. 

When the signal source of the DVD  Player is in the IN

position,  the  LCD  on  the  front  panel  will  not  illuminate
when no external signal is coming in.

When  the  A/V  IN/OUT  switch  is  in  the  OUT  position,

A/V  signals  will  come  out  from  the  3-in-1  A/V  cable
during  playback.  Use  the  DVD  Player's  AV  cable  to
transmit signal to the following components:

1. TV with A/V IN terminals

2. VCR/Video Cassette DVD player

3. V8 or VHS video cameras

4. Projector

8

Attention! Please set the IN/OUT switch at

OUT  position  for  default  setting,  otherwise

no  sound/screen  will  be  heard/seen  on  the

player during playback.

Copy Guard Protection:

When  the  DVD  player  audio/video  output  is  plugged  into

the  A/V  input  jacks  of  a  Video  Cassette  Recorder  (VCR)

using the audio/video cables,  (red, white and yellow  RCA

jacks)  poor  picture  quality  may  result  (i.e.  screen  on  TV

getting  brighter  and  dimmer)  due  to  Macrovision  copy

guard protection contained on some DVD discs. 

36