CTL convertible classmate pc Quick Setup Guide
© 2008, Intel Corporation. All rights reserved. Intel and the Intel logo
are trademarks of Intel Corporation in the U.S. and other countries.
are trademarks of Intel Corporation in the U.S. and other countries.
* Other marks and brands may be claimed as the property of others.
0109/MG/CMD/PDF 318938-002
US
Intel-powered
convertible classmate PC
convertible classmate PC
Part of the Intel® Learning Series
Quick Start Guide
Install Battery
PC must be powered off before installing or removing
the battery.
1. Align arrows on the battery with arrows on the
battery bay.
2. Slide the battery down gently but fi rmly until it locks.
3. Slide the lock switch into the locked position.
2
Installing and Charging Battery
1
2
3
Charge Battery
1. Connect the
AC Power Cord to the Power Adapter
2. Connect the
Power Adapter to the computer
Power
Input.
3. Plug the
Power Cord into a Power Outlet
4.
LED Battery light indicator will turn orange when
charging and green when fully charged
* If LED Battery light indicator is Blinking Orange or not lit, the battery is
not charging. Please check connection and battery installation.
IMPORTANT:
The battery must be charged for at least
six hours
before fi rst use. The battery charge indicator will become
green when the battery is fully charged. Keep the power
cable away from young children.
Calibrate the Touch Screen
If the cursor does not properly track the stylus pen, please
follow the below steps.
follow the below steps.
1. Single Click the Blue Home Key
2. Select the Quick Controller icon
3. Select the Calibrate Screen icon
4. Using the stylus, touch and hold each fl ashing mark
that appears on screen.
that appears on screen.
Connecting to the Internet
There are two ways to connect to the internet:
Set Up a Wireless Connection
1. Single Click the Blue Home Key
2. Select the Easy Network icon
3. Select Turn on Wireless
4. Wireless LED will turn green
Set Up an Ethernet Connection
1. Single Click the Blue Home Key
1. Single Click the Blue Home Key
2. Select the Easy Network icon
3. Select Turn off Wireless
4. Wireless LED will turn off
5
Calibrating the Screen
and
Connecting
Ethernet Port
Ethernet Cable not supplied in box