Lexmark X850e Reference Guide
109
Attendance messages
290.21 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam at the ADF
size sensor 1 while the scanner is
idle.
size sensor 1 while the scanner is
idle.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
290.22 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam at the ADF
size sensor 2 while the scanner is
idle.
size sensor 2 while the scanner is
idle.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
290.23 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam at the ADF
size sensor 3 while the scanner is
idle.
size sensor 3 while the scanner is
idle.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
290.90 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam at the feed
motor.
motor.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
291.00 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam at the ADF
registration sensor while the scanner
is idle.
registration sensor while the scanner
is idle.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
291.01 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
There is a jam in the scanner which
occurred while the original document
was being inverted in the ADF, but the
invert sensor is turned off.
occurred while the original document
was being inverted in the ADF, but the
invert sensor is turned off.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
291.02 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam while
inverting the original document in the
ADF, and the invert sensor is turned
on.
inverting the original document in the
ADF, and the invert sensor is turned
on.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
291.03 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
There is a jam in the ADF, but the
invert sensor is turned off.
invert sensor is turned off.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
293 Replace all
originals if restarting
job.
originals if restarting
job.
The MFP is sent a scan job; however,
there is no original document in the
ADF.
there is no original document in the
ADF.
Touch Continue if no scan job is active when
the attendance message appears. This clears
the message.
the attendance message appears. This clears
the message.
Touch Cancel Job if a scan job is processing
when the attendance message appears. This
cancels the job and clears the message.
when the attendance message appears. This
cancels the job and clears the message.
Touch Scan from Automatic Document Feeder
if the page jam recovery is active. Scanning
resumes from the ADF immediately after the
last successfully scanned page.
if the page jam recovery is active. Scanning
resumes from the ADF immediately after the
last successfully scanned page.
Touch Scan from flatbed if page jam recovery is
active. Scanning resumes from the flatbed
immediately after the last successfully scanned
page.
active. Scanning resumes from the flatbed
immediately after the last successfully scanned
page.
Touch Finish job without further scanning if
page jam recovery is active. The job ends at the
last successfully scanned page, but the job is
not canceled. Successfully scanned pages go
to their destination: copy, fax, e-mail, or FTP.
page jam recovery is active. The job ends at the
last successfully scanned page, but the job is
not canceled. Successfully scanned pages go
to their destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active and
the job is restartable. The message clears. A
new scan job containing the same parameters
as the previous job starts.
the job is restartable. The message clears. A
new scan job containing the same parameters
as the previous job starts.
294.00 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam at the ADF
invert sensor while the scanner is idle.
invert sensor while the scanner is idle.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
294.01 Scanner jam,
remove all originals
from the scanner
remove all originals
from the scanner
The scanner detects a jam in the ADF
when the pre-registration sensor is on
to recognize the scan of side (page) 2
of a sheet.
when the pre-registration sensor is on
to recognize the scan of side (page) 2
of a sheet.
Remove all original documents from the
scanner to clear the jam. The message clears.
scanner to clear the jam. The message clears.
Message
Meaning
Action