Lexmark X850e User Guide
Printing from a USB flash memory device
54
Printing
We recommend using the following tested and approved USB flash memory devices in the 256 MB, 512 MB, and 1 GB
sizes:
sizes:
•
Lexar JumpDrive 2.0 Pro
•
SanDisk Cruzer Mini
Other USB flash memory devices must:
•
Be compatible with the USB 2.0 standard.
•
Support the Full-Speed standard as well.
Devices only supporting USB low speed capabilities are not supported.
•
Use the FAT file system.
Devices formatted with NTFS or any other file systems are not supported.
To print from a USB flash memory device:
1
Make sure the MFP is on and
Ready
or
Busy
appears.
2
Insert a USB flash memory device into the USB Direct interface.
Note: If you insert the memory device when the MFP requires attention such as when a paper jam has
occurred, the MFP ignores the memory device.
3
Touch the arrow next to the document you want to print.
A screen asking the number of copies to be printed will appear.
4
To print only one copy, touch Print, or touch + to enter the number of copies.
Note: Do not remove the USB flash memory device from the USB Direct interface until the document has
finished printing.
The document will begin printing.
Note: If you insert the memory device when the MFP is busy printing other jobs, the message
Printer
Busy
appears. Select Continue, and your job prints after the other jobs finish.