TallyGenicom 2440 User Guide
Operating the printer
Setting up your printer
2-7
Connecting the printer
Checking the printer voltage
Make sure that the device has been set to the correct voltage (e.g. 120 V in the USA, 230 V
in Europe). To do this, check the type plate at the back of the printer. Contact your dealer
if the setting is incorrect.
in Europe). To do this, check the type plate at the back of the printer. Contact your dealer
if the setting is incorrect.
Never switch on the printer if the voltage setting is incorrect, since this may
result in severe damage.
Connecting the mains power
1
Make sure that the power switch
A
,
located at the right side of the printer, is
in the
in the
Off
position.
2
Connect the power cable to the power
inlet of the printer. Connect the power
cable plug to a mains socket.
inlet of the printer. Connect the power
cable plug to a mains socket.
A