TallyGenicom 2440 User Guide
Special mode
Using the Diagnostic Functions
4-25
Top of Form Adjustment Function
Print positions often change gradually when you use the printer over long periods of time.
The ADJUST function allows you to adjust these positions by fine-tuning the Top of
Form origin.
The ADJUST function allows you to adjust these positions by fine-tuning the Top of
Form origin.
1
To enter Top Adjustment Function:
a) Make sure that the tractors are loaded with continuous feed paper and that the pa-
per select lever is set forward.
b) Turn the printer off.
c) Turn the printer back on while pressing the FF/LOAD key.
a) Make sure that the tractors are loaded with continuous feed paper and that the pa-
per select lever is set forward.
b) Turn the printer off.
c) Turn the printer back on while pressing the FF/LOAD key.
Do not press any keys alone or in combination, except for pressing the FF/LOAD key alone
when turning the printer on, to avoid initiating unexpected tests not permitted for the user.
when turning the printer on, to avoid initiating unexpected tests not permitted for the user.
2
To set Top Adjustment value:
a) The format of adjustment Loading Position is printed as below, 15 patterns of
adjustment Loading Position are printed.
a) The format of adjustment Loading Position is printed as below, 15 patterns of
adjustment Loading Position are printed.
b) The format of Loading Position is printed and the paper is automatically advanced
for viewing after the printing is complete. The message of ”Loading Position Pos =
xx” is printed.
c) Use the PARK/PRINT/
for viewing after the printing is complete. The message of ”Loading Position Pos =
xx” is printed.
c) Use the PARK/PRINT/
T
or the TEAR/
S
key to choose the new top position.
The adjustment range is "01-15", and the center value is "08". It is possible to set dif-
ferent values for Tractor and Manual.
ferent values for Tractor and Manual.
3
Printing the new value:
By pressing SEL/MENU/EXIT key, the adjustment value for Low Speed is deter-
mined and saved. The new adjustment values for Loading Position is printed. The
paper is automatically advanced for viewing after the printing is complete. After eject-
ing a form, the message” Loading Position = xx” is printed.
By pressing SEL/MENU/EXIT key, the adjustment value for Low Speed is deter-
mined and saved. The new adjustment values for Loading Position is printed. The
paper is automatically advanced for viewing after the printing is complete. After eject-
ing a form, the message” Loading Position = xx” is printed.
”xx” is new adjustment value.
4
Exit the Top Adjustment mode:
Turn the printer off to exit the Top Adjustment mode.
Turn the printer off to exit the Top Adjustment mode.
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Loading Position = xx
10/60 inch
Loading Position = xx