Bosch ex72mx4v0409-n Specification Guide
2 | EX72 Explosion-protected Camera
CSA/NRTL LR 113310
Class
Class
2258 / 82 - Process Control Equipment - For Hazardous Lo-
cations - Certified to US Standard
2258 / 02 - Process Control Equipment - For Hazardous
Locations
Safety
OSHA / ANSI / UL / CSA
UL 508, 16th Edition - Industrial Control Equipment
UL 698, 11th Edition - Industrial Control Equipment for Use
UL 698, 11th Edition - Industrial Control Equipment for Use
in Hazardous (Classified) Locations
UL 1203, 2nd Edition - Explosion-Proof and Dust-Ignition-
UL 1203, 2nd Edition - Explosion-Proof and Dust-Ignition-
Proof Elec. Eqmt for Use in Hazardous (Classified) Locations
CSA C22.2 No.0-M1991 - General Requirements - Canadian
CSA C22.2 No.0-M1991 - General Requirements - Canadian
Electrical Code Part II
CSA C22.2 No.0.4-M1982 - Bonding and Grounding of
CSA C22.2 No.0.4-M1982 - Bonding and Grounding of
Electrical Equipment (Protective Grounding)
CSA C22.2 No.25-M1966 - Enclosures for Use in Class II
CSA C22.2 No.25-M1966 - Enclosures for Use in Class II
Groups E, F and G Hazardous Locations
CSA C22.2 No.30-M1986 - Explosion-proof Enclosures for
CSA C22.2 No.30-M1986 - Explosion-proof Enclosures for
Use in Class I Hazardous Locations
CSA C22.2 No.94-M1991 - Special Purpose Enclosures
CSA C22.2 No.142-M1987 - Process Control Equipment
Class I, Division 1 and 2, Groups B, C, and D
Class II, Division 1 and 2, Groups E, F, G
Class III
ATEX Ex II 2G certified - Equipment or Protective System
CSA C22.2 No.94-M1991 - Special Purpose Enclosures
CSA C22.2 No.142-M1987 - Process Control Equipment
Class I, Division 1 and 2, Groups B, C, and D
Class II, Division 1 and 2, Groups E, F, G
Class III
ATEX Ex II 2G certified - Equipment or Protective System
intended for use in Potentially Explosive Atmospheres; Di-
rective 94/9/EC
ATEX Ex d IIC T6 certified - Equipment or Protective System
ATEX Ex d IIC T6 certified - Equipment or Protective System
intended for use in Potentially Explosive Atmospheres; Di-
rective 94/9/EC
Operational Temperature Code T6 (At ambient operational temperature
of 40ºC, the maximum unit surface temperature will not ex-
ceed 85ºC.)
Environ-
mental
CSA / NEMA TYPE 4X
Installation/Configuration Notes
Dimensions
103.6
(4.08)
146
(5.75)
Ø8
(0.31)
146
(5.75)
17
(0.67)
135
(5.30)
79 min.
(3.10)
150 min.
(5.91)
Technical Specifications
Color Cameras
CCD
MX4 LXR Mechanical Fil-
ter
C7 High Resolution Color
Image Sensor
1/3 in LXR CCD
1/3 in Interline Super-
HAD
Resolution
540 TVL color/ 540 TVL
mono
500 TVL
Effective Pixels
(NTSC)
768 (H) x 494 (V)
768 (H) x 494 (V)
Effective Pixels (PAL) 752 (H) x 582 (V)
768 (H) x 582 (V)
Sensitivity
0.02 lux at F1.4
2.7 lux at F1.4
S/N Ratio
Greater than 48 dB
Greater than 48 dB
Output Signal
0.45
Gamma
On / Off selectable
Gain Control
AGC
Electronics Iris
1/60 to 1/100,000
(NTSC)
1/50 to 1/100,000
(PAL)
Lens
Varifocal 4 to 9 mm or 9 to 22 mm auto-iris lens
Voltage
12 VDC or 24 VAC
Power consumption 3.9 W (max.)
Cabling holes
Cabling holes
Two 3/4-inch NPT conduit entries
Operation Tempera-
ture Range
-50 ºC to +40 ºC (-58 ºF to 104 ºF)
Weight
1.4 kg (3.1 lbs)
Dimensions
117 x 117 x 99 mm (4.6 x 4.6 x 3.9 in)