Linksys RT41P2-AT Installation Instruction

a

If you are connecting through 

PPPoE or if you normally enter a 

user name and password to 

access the Internet, then select 

PPPoE.

b

Enter the User Name and 

Password provided by your 

high-speed Internet service 

provider.

c

Always select Keep Alive.

d

Click the Save Settings button. 

e

Click the Status tab and then 

the Router tab. Click the 

Connect button to start the 

connection.

f

Then proceed to Step E.

PPTP is a service used in Europe and 

Israel only. If you are using a PPTP 

connection, check with your high-

speed Internet service provider for 

the necessary setup information. 

Then proceed to Step E.

D

For the Internet Connection 

Type setting, four types are 

offered through the drop-down 

menu. Depending on which 

connection type you select, 

the features available on the 

Basic Setup screen will differ. 

Proceed to the instructions for 

your connection type.

a

If you are connecting through 

DHCP or a dynamic IP address, 

then select Automatic 

Configuration - DHCP.

b

Click the Save Settings button, 

and then proceed to Step E.

a

If you are connecting through 

a static or fixed IP address, 

then select Static IP.

b

Enter the Internet IP Address, 

Subnet Mask, and Gateway 

Address provided by your high-

speed Internet service 

provider.

c

Then enter the DNS address(es) 

provided by your high-speed 

Internet service provider. You 

need to enter at least one DNS 

address.

d

Click the Save Settings button, 

and then proceed to Step E.

E

If requested by your high-

speed Internet service provider 

(usually cable high-speed 

Internet service providers), 

complete the Host Name and 

Domain Name fields. 

Otherwise, leave them blank.

F

If you haven’t already done so, 

click the Save Settings button. 

Then close the web browser.

G

Power your cable or DSL 

modem off and back on 

again.

H

Restart or power on your PCs so 

they can obtain the Router’s 

new settings.

I

To test the Router’s settings, 

open your web browser from 

any computer. In the browser’s 

Address field, enter 

www.linksys.com/registration 

and press the Enter key.

J

To sign up for or activate your 

AT&T CallVantage Service 

account, visit 

http://www.att.com/linksys 

and follow the on-screen 

instructions.

Congratulations! The installation of 

the Router is complete.

RT41P2-AT-QI-40824NC JL

Linksys is a registered trademark or trademark of 
Cisco Systems, Inc. and/or its affiliates in the U.S. 
and certain other countries. Copyright © 2004 
Cisco Systems, Inc. All rights reserved.

Model No.

PPPoE

PPTP

I

For additional information or troubleshooting 
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further 
support.

1-866-596-8464
(toll-free from US and Canada)

https://www.callvantage.att.com

800-326-7114 
(toll-free from US or Canada)

support@linksys.com

http://www.linksys.com   or
http://support.linksys.com

http://www.linksys.com/support

ftp://ftp.linksys.com

800-546-5797 (800-LINKSYS)

Automatic

Static IP

Configuration-DHCP