Linksys RVS4000 Installation Instruction

Model No.

Model No.

• User  Guide  on  CD-ROM
• Network  Cable
• Power Adapter
• Stands
• Registration  Card
• Quick Install Guide

1

Before setting up the 

Router, make sure your PCs are 
configured to obtain an IP (or 
TCP/IP) address automatically 
from the Router.

Before you begin, make sure 
that you have the setup 
information for your specific 
type of Internet connection. 
The installation technician 
from your ISP should have left 
this information with you after 
installing your broadband 
connection. If not, you can call 
your ISP to request the 
settings.

Make sure that all of your 
network’s hardware is 
powered off, including the 
Router, PCs, and cable or DSL 
modem.

Connect one end of an 
Ethernet network cable to one 
of the LAN ports (labeled 1-4) 
on the back of the Router, and 
the other end to an Ethernet 
port on a PC.

Repeat step C to connect 
more PCs, a switch, or other 
network devices to the Router.

Connect a different Ethernet 
network cable from your 
cable or DSL modem to the 
Internet port on the Router’s 
back panel.

Power on the cable or DSL 
modem.

Connect the power adapter to 
the Router’s Power port, and 
then plug the other end into 
an electrical outlet.

The Power and Internet LEDs 
on the front panel will light up 
green as soon as the power 
adapter is connected 
properly.

Power on the PCs.

The Router’s hardware 
installation is now complete.

WIRED

C

E

G