Linksys PSUS4 Installation Instruction

Model No.

Quick Installation

Quick Installation

A Division of Cisco Systems, Inc.

®

Model No.

WIRED

• One PrintServer for USB with 4-Port Switch
• One Power Supply
• One Setup CD with User Guide
• One Ethernet Network Cable
• One USB cable
• One Quick Installation
• One Registration Card

1

2

Before starting the physical installa-

tion, note the PrintServer’s Default 

Name on the bottom of the Print-

Server for future use.

A

Plug one end of the Ethernet 

network cable into one of the 

PrintServer’s LAN Ports (1-4). 

(See Figure A.)

B

Connect the other end of the 

cable into your networked hub, 

switch, or router. The distance 

between the PrintServer and 

the other device should not 

exceed 328 feet (100 meters). 

C

Use the USB cable to connect 

your printer to the PrintServer’s 

USB port. Plug the Type A con-

nector end into the PrintServer 

(Figure D) and the Type B con-

nector end into the printer.

D

Power on your printer.

E

Plug the power adapter cord 

into the PrintServer’s Power port, 

which is located on the right 

side of the PrintServer. (See Fig-

ure F.)

F

Plug the power adapter into 

an electrical outlet.

The PrintServer connection is com-

plete. Go to Step 2.

Connecting the PrintServer

F

The Basic Settings screen, 

shown in Figure F, will appear. If 

you want to change the 

Device Name or Domain 

Name, enter the Device Name 

and Domain Name in the 

respective fields. Click Next.

G

The IP Settings screen, Figure 

G, appears next. If your network 

uses a router with a DHCP Inter-

net Protocol setting that auto-

matically assigns an IP 

address, select Automatically 

obtain an IP address (DHCP). If 

your network uses a static IP 

address, select Set IP configu-

ration manually, and enter the 

IP Address, Subnet Mask, and 

Gateway in the fields provided. 

Click Next.

H

The next screen that appears is 

the Set PrintServer’s Password 

screen, shown in Figure H. If 

you want to change your pass-

word, enter your current pass-

word in the Current Password 

screen. Enter the new pass-

word in the New Password field, 

then enter it again in the Verify 

Password field. Click Next.

C

G

Configuring the PrintServer

A

E

F

A

Insert the Setup CD-ROM into 

the computer’s CD-ROM drive. 

The Setup CD-ROM should run 

automatically. If it does not, 

click the Start button and 

choose Run. In the box that 

appears, enter D:\setupWiz-

ard.exe  (if “D” is the letter of 

your CD-ROM drive).

B

When you see the Welcome 

screen, Figure B, click Setup 

Wizard to continue.

C

The screen in Figure C  will 

appear while the Setup Wizard 

is searching for the USB Print-

Server.

D

After the Setup Wizard has 

found the USB PrintServer, the 

screen in Figure D will appear. 

If this is the first time you have 

run the Setup Wizard, make 

sure that List only new (uncon-

figured) Print Servers is selected 

and your Print Server is listed by 

its default server name. If you 

have previously configured the 

Print Server, select List all com-

patible Print Servers. Click Next 

to continue.

E

The Password screen, Figure E, 

will appear next. Enter the 

default password admin in the 

field. Click Enter.

IMPORTANT: Make sure to use 
the power adapter that is sup-
plied with the PrintServer. Use of 
a different power adapter could 
damage the PrintServer.

C

E

D

B

 

H