Linksys SR2016 Brochure

The 16-Port 10/100/1000 Gigabit Switch provides non-blocking, wire 
speed switching for your 10, 100, and 1000 megabit network clients. 
Drop this switch in place of your current workgroup hub or switch, 
and you can upgrade your high-requirement workstations to full 
Gigabit speeds as necessary, while continuing to service other clients 
at their current speeds. Or build your network from the ground up, 
with appropriate link speeds for each user's requirements. Either 
way, it's perfect for graphics, multimedia, and other applications that 
have to move large files across the network quickly.

With the 16-Port 10/100/1000 Gigabit Switch, you can connect your 
existing 10/100 Ethernet network to a Gigabit server backbone 
without any additional equipment. All ports have automatic MDI/
MDI-X crossover detection, so you don't have to worry about the 
cable type. Each port independently and automatically negotiates for 
best speed and whether to run in half- or full-duplex mode. Address 
learning and aging is supported, as well as 802.3x flow control with 
head-of-line blocking prevention to keep your high-speed clients 
from bogging down in lower-speed traffic. Fast store-and-forward 
switching prevents damaged packets from being passed on into the 
network.

World famous Linksys reliability and the limited lifetime warranty give 
you peace of mind and the rackmount form factor integrates 
smoothly into your network infrastructure. Let the Linksys 16-Port 
10/100/1000 Gigabit Switch kick your network into high gear.

Sixteen 10/100/1000Mbps, half/full 
duplex, switched ports.

Forwards packets at non-blocking, 
full wire speed.

FAll ports have auto speed 
negotiation and auto MDI/MDI-X 
crossover detection.

Linksys reliability and limited 
lifetime warranty.