Linksys WET54GS5 Leaflet

Model No.

Product Data

High-speed cable-free bridging 
between remote workgroups!

Provides high-speed 
cable-free bridging 
between remote 
workgroups

Wireless communi-
cations protected 
with 128-bit encryp-
tion

Built-in 5-port 10/100 
switch with auto MDI/
MDI-X cable detec-
tion

Converts wired-Ether-
net devices to Wire-
less-G network 
connectivity

The Wireless-G Ethernet Bridge with 5-port Switch can be used 

as a kind of "cable-less cable" for connecting remote areas 

together.  Maybe Shipping is all the way across the warehouse 

from Receiving.  You can connect up to 5 Ethernet-equipped 

computers directly to the high-speed 10/100 switch ports on 

the Wireless-G Ethernet Bridge.  Put another one (or a Wireless-

G Access Point, or our one-port Wireless-G Ethernet Bridge) at 

the other end, and those 5 computers are connected to your 

main network -- with no need to string wires.

And those 5 switch ports can support devices other than PCs.  

Since there are no drivers to load, you can make any wired-

Ethernet device -- like a printer or network attached storage 

device -- into a wireless network device.  All five ports are auto 

speed negotiating, and have automatic MDI/MDI-X crossover 

detection, so you don't have to worry about the cable type.  

To protect your data and privacy, all wireless transmissions 

can be secured with up to 128-bit encryption.

The Switch supports VPN pass through and port-forwarding.  

You can partition your network into up to 64 VLANs, using port-

based 802.1q tagging.  It also supports 802.1d Spanning Tree 

Protocol to prevent network loops.  You can enable QoS on 

the switch side, with 4 levels of prioritization by port, 802.1p, 

ToS or DiffServ methods.  And even with all this power, set up is 

a snap with the web browser-based configuration utility.

Let the Wireless-G Ethernet Bridge with 5-port Switch from Link-

sys open up exciting new possibilities for your wireless network.