Partner Tech pt-5500 User Manual
22
Chapter 3 BIOS Setup Utility
VGA Share Memory Size
The VGA is built into the chipset and is assigned 16 MB of system memory by default. Use this setting to assign addi-
tional memory to the VGA. If you have 256 MB of system memory, the maximum that you can assign to VGA is 64
MB. The default setting is 16 MB.
tional memory to the VGA. If you have 256 MB of system memory, the maximum that you can assign to VGA is 64
MB. The default setting is 16 MB.
Select Display Device
If you connect an external display to the PT-5500, you can use this setting to turn off the LCD and only use the external
display. To use dual displays this must be set to CRT+LCD. The default setting is CRT+LCD.
display. To use dual displays this must be set to CRT+LCD. The default setting is CRT+LCD.
Panel Type
This setting allows the mainboard to be used with different panel types. Unless you change the panel of the PT-5500,
leave this setting at its default. The default setting is OA.
leave this setting at its default. The default setting is OA.
DRAM Clock/Drive Control
Selecting DRAM Clock/Drive Control displays this menu:
Figure 3.5
DRAM Clock/Drive Control menu
Current FSB/DRAM Frequency
Displays the current FSB and DRAM frequencies of the system. These fields are display only.
DRAM Clock
This item enables you to manually set the DRAM Clock to 133 MHz. We recommend that you leave this item at the
default value. The default value is By SPD.
default value. The default value is By SPD.