Cisco SR2016 Leaflet

Page of 2
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or
trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other
countries. All other trademarks mentioned in this document or Website are the property of their
respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (0705R)
© 2008 Cisco Systems, Inc. All rights reserved. 
Printed in the USA on recycled paper containing 10% postconsumer waste.
78-18816-01
Installation
Perform the steps in this section to install the hardware.
S
TEP
1
Make sure all the devices you will connect to the Switch are 
powered off. 
S
TEP
2
Connect a Category 5 Ethernet network cable to one of the numbered 
ports on the Switch. Connect the other end to a PC or other network 
device.
S
TEP
3
Repeat step 2 to connect additional devices. 
S
TEP
4
If you are using a mini-GBIC port, connect a mini-GBIC module to the  
port. For detailed instructions, refer to the module’s documentation.
N
OTE
The mini-GBIC ports are shared. Do not use port 12 if you 
are using themini-GBIC1 port. Do not use port 24 if you are 
using the mini-GBIC2 port.
S
TEP
5
Connect the supplied power cord to the Switch’s power port, and plug 
the other end into an electrical outlet. When connecting power, always 
use a surge protector.
S
TEP
6
Power on the devices connected to the Switch. Each active port’s 
corresponding LED will light up on the Switch. 
Congratulations! The installation of the 10/100/1000 Gigabit Switch is 
complete!
3
Specifications
The following table lists the specifications for the SR2016 10/100/1000 Gigabit 
Switch.
Model
SR2016
Standards
IEEE 802.3, 802.3u, 802.3x, 
802.3ab
Ports
16 10/100/1000 Mbps RJ-45 
ports
Cabling Type
Cat5 Ethernet
LEDs
System, 1 through 16
Dimensions
WxHxD
10.98” x 1.75” x 9.45”
279 mm x 44.5 mm x 240 mm
Unit Weight
4.75 lbs (2.155 kg)
Power
110-120VAC, 100W
Certification
FCC Class A, CE
Operating Temperature
32 to 104ºF (0 to 40ºC)
Storage Temperature
-40 to 158ºF (-40 to 70ºC)
Operating Humidy
20% to 95%, noncondensing
Storage Humidy
5% to 95%, noncondensing
4
The following table lists the specifications for the SR2024C 10/100/1000 
Gigabit Switch.
Model
SR2024C
Standards
IEEE 802.3, 802.3u, 802.3x, 
802.3ab
Ports
24 10/100/1000 Mbps RJ-45 
ports + 2 mini-GBIC ports
Cabling Type
Cat5 Ethernet
LEDs
System, 1 through 24
Dimensions
WxHxD
17.00” x 1.75” x 13.74”
432 mm x 44.5 mm x 349 mm
Unit Weight
7.98 lbs (3.621 kg)
Power
100-127/200-240V~1.0A/0.5A 
50~60HZ
Certification
FCC Class A, CE
Operating Temperature
32 to 104ºF (0 to 40ºC)
Storage Temperature
-4 to 158ºF (-20 to 70ºC)
Operating Humidity
10% to 90%, noncondensing
Storage Humidity
10% to 95%, noncondensing
Where to Go From Here
Resource
Location
Customer Support
www.cisco.com/go/smallbiz
End User License Agreement
www.cisco.com/go/smallbiz
Regulatory Compliance and Safety 
Information
www.cisco.com/go/smallbiz
Warranty Information
www.cisco.com/go/smallbiz
Cisco Partner Central site for Small 
Business
www.cisco.com/web/partners/sell/
smb/
5