Bosch VDC-485V03-20S Specification Guide
VDC‑485 Series Dome Cameras FlexiDome XF | 3
Technical Specifications
Electrical
Power supply
Rated voltage
Rated voltage
12 VDC or 24 VAC, 50/60 Hz
Voltage range
10.8 to 39 VDC or 12 to 28 VAC, 45 to 65 Hz
Power consumption
4 W (6 W with heater operating)
Imager
Interline transfer CCD, 1/3-inch image format
Active picture elements
PAL models
PAL models
752 H x 582 V
NTSC models
768 H x 494 V
Sensitivity (3200 K)
Model
Model
Usable pic-
ture
Usable pic-
ture
Full video
(30 IRE)
(50 IRE)
(100 IRE)
Color
VDC-485V03 Color
VDC-485V03 Color
0.16 lx
(0.015 fc)
0.35 lx
(0.033 fc)
1.4 lx
(0.13 fc)
Color + 10 x
SensUp
0.016 lx
(0.0015 fc)
0.035 lx
(0.0033)
0.14 lx
(0.013 fc)
NightSense
0.056 lx
(0.0052 fc)
0.13 lx
(0.012)
0.5 lx
(0.046)
NightSense+
10 x SensUp
0.0056 lx
(0.00052fc)
0.013 lx
(0.0012)
0.05 lx
(0.0046)
VDC-485V04 Color
0.4 lx
(0.037 fc)
0.9
(0.083)
3.6 (0.33)
Color + 10 x
SensUp
0.04 lx
(0.0037 fc)
0.09
(0.0083)
0.36
(0.033)
NightSense
0.14 lx
(0.013 fc)
0.32
(0.03)
1.3 (0.12)
NightSense+
10x SensUp
0.014 lx
(0.0013 fc)
0.032
(0.003)
0.13
(0.012)
VDC-485V09 Color
0.28 lx
(0.027 fc)
0.62 lx
(0.058 fc)
2.48 lx
(0.23 fc)
Color + 10 x
SensUp
0.028 lx
(0.0027 fc)
0.062 lx
(0.0058)
0.248 lx
(0.023 fc)
NightSense
0.099 lx
(0.0092 fc)
0.23 lx
(0.021)
0.88 lx
(0.081)
NightSense+
10 x SensUp
0.0099 lx
(0.00092)
0.023 lx
(0.0021)
0.088 lx
(0.0081)
SensUp
Automatic continuous up to 10 x, off selecta-
ble
Horizontal resolution
540 TVL
Signal-to-noise ratio
>50 dB
AGC
Auto, maximum level selectable 28 dB
Auto black
On/off selectable
Electronic shutter
Flickerless, on/off, default shutter
NightSense (XF only)
Auto, forced, off selectable
Day/Night (DN only)
Auto, monochrome, color selectable
Dynamic range
32 x dynamic range enhancement
Dynamic noise reduction Automatic, off, selectable
Sharpness correction
Sharpness correction
Horizontal and vertical, symmetrical
Backlight compensation Off, programmable window and level selecta-
ble
White balance
Automatic sensing (2500 to 9000 K), AWB
hold and manual
Video motion detector
Four (4) areas, sensitivity selectable
Camera ID
16-character editable string, position selecta-
ble
Video output
Composite video 1.0 Vpp, 75 ohm
Remote control
Bi-directional coaxial communication
Synchronization
Internal or LineLock*
Connector
Flying leads (through the back)
* LineLock (only when AC-powered) synchronizes the camera
to the power line zero crossing for roll-free vertical interval
switching. Vertical phase delay can be adjusted (from 0° to
358°) to allow vertical synchronization in multi-phase power
installations.
to the power line zero crossing for roll-free vertical interval
switching. Vertical phase delay can be adjusted (from 0° to
358°) to allow vertical synchronization in multi-phase power
installations.
Optical
Varifocal
Manual zoom and focus adjustment
Iris control
Automatic iris control
Viewing angle
3 to 9.5 mm
3 to 9.5 mm
Wide 95º x 69º (H x V)
Tele 30.2º x 22.6º (H x V)
Tele 30.2º x 22.6º (H x V)
3.7 to 12 mm
Wide 76.1º x 55.8º (H x V)
Tele 23.8º x 17.9º (H x V )
Tele 23.8º x 17.9º (H x V )
9 to 22 mm
Wide: 31.2º x 22.8º (H x V)
Tele: 12.8º x 9.6º (H x V )
Tele: 12.8º x 9.6º (H x V )
Mechanical
Dimensions
See drawings
Weight
740 g (1.63 lb)
Mounting
Flush on hollow surface with three (3) screws
in a 4S electrical box
Color
White (RAL9010) trim ring with black inner
liner
Adjustment range
360º pan, 90º tilt, ±90º azimuth
Dome bubble
Polycarbonate, clear with UV blocking anti-
scratch coating
Trim ring
Aluminum
Environmental
Operating temperature
-50 ºC to +50 ºC (-58 ºF to +122 ºF) (with
heater ‘ON’)
Storage temperature
-40 ºC to +70 ºC (-40 ºF to +158 ºF)
Humidity
5% to 93% relative humidity
Impact protection
IEC 60068-2-75 test Eh, 50 J
EN 50102, exceeding IK 10
EN 50102, exceeding IK 10
www.boschsecurity.com