Sennheiser EM 2000 User Guide
Synchronizing transmitters with receivers
31
Synchronizing transmitters with receivers
When synchronizing a transmitter with a receiver, please observe the following:
Synchronizing a transmitter with the receiver – individual
operation
operation
Upon delivery, transmitter and receiver are synchronized with each other. If, however, you
cannot establish a transmission link between transmitter and receiver, you have to synchro-
nize the channels of the devices:
cannot establish a transmission link between transmitter and receiver, you have to synchro-
nize the channels of the devices:
왘
With the receiver, perform a frequency preset scan to scan the frequency banks for
unused channels (“
unused channels (“
Scan New List
”, see page 23).
Then “
Sync
” appears on the display panel of the receiver.
왘
Synchronize a transmitter with the receiver via the infra-red interface (see page 15).
This establishes a transmission link between the transmitter and the receiver.
This establishes a transmission link between the transmitter and the receiver.
Alternatively, you can set the channel on the transmitter manually:
왘
Make sure that you set the transmitter to the same frequency bank and the same channel
as the receiver.
as the receiver.
Synchronizing transmitters with receivers – multi-channel
operation
operation
Network operation
Combined with 2000 series transmitters, 2000 series receivers can form transmission links
that can be used in multi-channel systems. In multi-channel operation, the receivers are
remote controlled via a PC running the “
that can be used in multi-channel systems. In multi-channel operation, the receivers are
remote controlled via a PC running the “
Wireless Systems Manager
” (WSM) software. For
further information on downloading the software, visit the ew G3 product page on our
website at www.sennheiser.com.
website at www.sennheiser.com.
왘
Connect the receivers in a network (see page 12).
왘
Only use a transmitter and a receiver from the same frequency range (see the
type plates on the transmitter and the receiver).
type plates on the transmitter and the receiver).
왘
Make sure that the desired frequencies are listed in the enclosed frequency infor-
mation sheet.
mation sheet.
왘
Make sure that the desired frequencies are approved and legal in your country
and, if necessary, apply for an operating license.
and, if necessary, apply for an operating license.
In order to ensure an intermodulation-free transmission, use the same frequency
bank for all transmission links.
bank for all transmission links.
531.375 MHz
B.Ch: 20.
24
Sync
Easy Setup
PEAK
-10
0
40
30
20
10
-20
-40
AF
RF
-30
ew300 G3
WSM
543.200
B.Ch: 20.64
PEAK
MUTE
EQ:
+ 12dB
P
-10
0
40
30
20
10
-20
-30
-40
-30
-40
AF
RF
MHz
True Diversity Receiver EM 2000
**2000**
SKM2000
543.200
B.Ch: 20.64
PEAK
MUTE
EQ:
+ 12dB
P
-10
0
40
30
20
10
-20
-30
-40
-30
-40
AF
RF
MHz
True Diversity Receiver EM 2000
**2000**
SKM2000
543.200
**2000**
**2000**
B.Ch: 20.64
PEAK
MUTE
EQ:
+ 12dB
P
-10
0
40
30
20
10
-20
-30
-40
-30
-40
AF
RF
MHz
543.200
B.Ch: 20.64
PEAK
MUTE
EQ:
+ 12dB
P
-10
0
40
30
20
10
-20
-30
-40
-30
-40
AF
RF
MHz
True Diversity Receiver EM 2050
SKM2000
SKM2000
Advantages of controlling the receivers via the “
Wireless Systems Manager
” (WSM)
software:
• Detailed overview of all receiving channels
• Remote control of all receivers in the network
• Combination of receivers of different frequency ranges (see page 4).