Partner Tech pt-5700 User Manual
Installing a CompactFlash card
15
Installing a CompactFlash card
The CompactFlash card reader uses an IDE (Integrated Drive Electronics) interface and only supports storage cards.
Plug and play is not supported so cards have to be installed before you turn the PT-5700 on. After installing a Compact-
Flash card, replace the cover to prevent the card being accidently removed while power is on.
Plug and play is not supported so cards have to be installed before you turn the PT-5700 on. After installing a Compact-
Flash card, replace the cover to prevent the card being accidently removed while power is on.
Refer to the following to install a CompactFlash card.
1
Remove the screw and the card reader
cover.
cover.
2
Remove the screw.
3
Insert the CompactFlash card as shown.
Caution: Inserting the card incorrectly can
damage the connector pins. Ensure the card
is oriented as shown and insert it gently.
Caution: Inserting the card incorrectly can
damage the connector pins. Ensure the card
is oriented as shown and insert it gently.
4
To remove a card press the eject button and
pull the card out.
pull the card out.
5
Replace the cover and screw.