Bosch vez-221-ecceiva Specification Guide

AutoDome Easy II IP | 3

iSCSI device support
Built-in iSCSI support allows AutoDome Easy II IP to
stream video directly to an iSCSI RAID array. This enables
local video storage just like a conventional DVR without
streaming high bandwidth video across the network. Local
recording, or Recording at the Edge, minimizes bandwidth
usage and makes system recording performance totally
independent from network performance.
Network-based control and configuration
The AutoDome Easy II IP enables full camera control and
configuration capabilities over the network. Operators or
technicians can control camera pan/tilt/zoom operation,
presets, tours, and alarm management functions virtually
anywhere without need for additional wiring.
The embedded web server lets the installer access all the
user settings, make camera adjustments, and update
firmware via a standard web browser.
Device management
Simple Network Management Protocol (SNMP) support
facilitates the remote monitoring and management.
AutoDome Easy II IP provides full support for SNMP v3.
Cost effective coverage
It typically requires four or more fixed dome cameras to
provide a full 360 degrees of surveillance coverage.
Traditional PTZ dome cameras provide full coverage, but
at a significantly higher cost. A single AutoDome Easy II IP
provides as much coverage as four fixed domes, but is
priced lower than a traditional PTZ dome camera. Not only
is your initial investment smaller, but installation and
maintenance costs are reduced as well.
Superior privacy masking
The AutoDome Easy II IP allows for a total of 12 individual
privacy masks, with up to 12 displayed in the same scene.
Unlike conventional privacy masks, these can each be
programmed with three, four, or even five corners to
cover more complex shapes. As the camera is zoomed
each mask changes size smoothly and quickly ensuring
that the covered object cannot be seen. You also have a
choice of black, white, and blurred characteristics. The
blurred option comes in handy when privacy is an issue,
but determining the presence of motion is still required.
Ease of installation and servicing
The AutoDome Easy II IP has been designed for quick and
easy installation; a key feature from Bosch CCTV products.
The dome comes fully assembled and ready for surface
mount applications. Also available are wall, recessed, and
pipe mounting kits which allow the AutoDome Easy II IP to
be easily adapted for the individual site requirements.
Available in white or charcoal.

Power over Ethernet
Power for indoor camera models may be supplied via a
Power over Ethernet (IEEE 802.3af) compliant network
cable connection. With this configuration, only a single
cable connection is required to view, power, and control
the camera.
Viewing
View the video on a PC using a Web browser, in the Bosch
Video Management System or Divar XF, or integrate it into
another video management system.

Europe

CE

Electromagnetic Com-

patibility (EMC)

Complies with FCC Part 15, ICES-003, and CE

regulations

Product Safety

Complies with CE regulations, UL, CSA, EN, and

IEC Standards

Environmental

(Outdoor models)

IP65

2

I

1

T

VEZ

C

W

2

2

1

I

W

T

E

2

4

1

-

-

E

3

C

5

IVA

6

1

PAL

C

Charcoal

2

NTSC

W

White

1

Color (10x)

C

Clear

T

Tinted