Advantek Networks awr-1054gr User Guide

3.3 Operation Mode

You can setup different modes to LAN and WLAN interface for NAT and bridging function.

Gateway:

In this mode, the device is supposed to connect to internet via ADSL/Cable Modem.

The NAT is enabled and PCs in LAN ports share the same IP to S|ISP through WAN port. The

connection type can be setup in WAN page by using PPPoE, DHCP client, PPTP client, L2TP

client or static IP.

Bridged:

In this mode, all Ethernet ports and wireless interface are bridged together and NAT

function is disabled. All the WAN related function and firewall are not supported.

Wireless ISP:

In this more, all Ethernet ports are bridged together and the wireless client will

connect to ISP AP Router. The NAT is enabled and PCs in Ethernet ports share the same IP to

ISP through wireless LAN. You must set the wireless to client mode first and connect to the ISP

AP in Site-Survey page. The connection type can be setup in WAN page by using PPPoE,

DHCP client, L2TP client or static IP.