Alcatel-Lucent 6850-48 Supplementary Manual
Verifying NTP Configuration
Configuring Network Time Protocol (NTP)
page 4-14
OmniSwitch AOS Release 6 Switch Management Guide
September 2009
Verifying NTP Configuration
To display information about the NTP client, use the show commands listed in the following table:
For more information about the resulting displays from these commands, see the “NTP Commands” chap-
ter in the OmniSwitch CLI Reference Guide.
ter in the OmniSwitch CLI Reference Guide.
Examples of the show ntp client, show ntp server status, and show ntp client server-list command
outputs are given in the section
outputs are given in the section
.
Displays information about the current client NTP configuration.
Displays the basic server information for a specific NTP server or a list
of NTP servers.
of NTP servers.
Displays a list of the servers with which the NTP client synchronizes.
Displays information about all authentication keys.