Alcatel-Lucent 6850-48 Network Guide
Remote Monitoring (RMON)
Diagnosing Switch Problems
page 45-38
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
Displaying Statistics for a Particular RMON Probe
To view statistics for a particular current RMON probe, enter the
command,
specifying an entry number for a particular probe, such as:
-> show rmon probes 4005
A display showing statistics for the specified RMON probe will appear, as shown in the following
sections.
sections.
Sample Display for Ethernet Statistics Probe
The display shown here identifies RMON Probe 4005’s Owner description and interface location
(OmniSwitch Auto Probe on slot 4, port 5), Entry number (4005), probe Flavor (Ethernet statistics), and
Status (Active). Additionally, the display indicates the amount of time that has elapsed since the last
change in status (48 hours, 54 minutes), and the amount of memory allocated to the probe, measured in
bytes (275).
(OmniSwitch Auto Probe on slot 4, port 5), Entry number (4005), probe Flavor (Ethernet statistics), and
Status (Active). Additionally, the display indicates the amount of time that has elapsed since the last
change in status (48 hours, 54 minutes), and the amount of memory allocated to the probe, measured in
bytes (275).
-> show rmon probes 4005
Probe’s Owner: Switch Auto Probe on Slot 4, Port 5
Entry 4005
Flavor = Ethernet, Status = Active
Time = 48 hrs 54 mins,
System Resources (bytes) = 275