Alcatel-Lucent 6850-48 Network Guide

Configuring Network Security

Quick Steps for Configuring Network Security

OmniSwitch AOS Release 6 Network Configuration Guide

page 47-3

1 To create a monitoring-group and configure port associations for that group, use the 

command. Enter netsec group followed by group name and port followed by the slot number, a slash(/), 
and the port number. For example:

-> netsec group group1 port 2/3

2 To configure the different anomaly parameters of a monitoring-group, use the 

 

command. For example:

-> netsec group group1 anomaly arp-flood state enable period 60

3 Repeat steps 1 through 2 to monitor different anomalies of a different monitoring-group. 

4 Check the summary of a particular anomaly or all the anomalies in a group. For example, to view the 
summary of arp-flood anomaly that belong to “group1”, enter:

-> show netsec group group1 anomaly arp-flood summary

Note. Optional. To verify the Network Security summary of a specific anomaly on port 1 of slot 2, enter 

 command. For example:

-> show netsec port 2/1 anomaly arp-addr-scan summary

Slot

Port  Anomaly          Observed  Detected

-------------------------------------------

2/1   arp-addr-scan    7         1

 

See the OmniSwitch CLI Reference Guide for information about the fields in this display.