Alcatel-Lucent 6850-48 Network Guide
Using 802.1Q 2005 Multiple Spanning Tree
Verifying the MST Configuration
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
page 12-19
Verifying the MST Configuration
To display information about the MST configuration on the switch, use the show commands listed below:
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide.
ence Guide.
Displays the Spanning Tree bridge configuration for the flat mode Com-
mon and Internal Spanning Tree (CIST) instance.
mon and Internal Spanning Tree (CIST) instance.
Displays Spanning Tree bridge information for a Multiple Spanning
Tree Instance (MSTI).
Tree Instance (MSTI).
Displays Spanning Tree port information for the flat mode Common and
Internal Spanning Tree (CIST) instance.
Internal Spanning Tree (CIST) instance.
Displays Spanning Tree port information for a flat mode Multiple Span-
ning Tree Instance (MSTI).
ning Tree Instance (MSTI).
Displays the Multiple Spanning Tree (MST) region information for the
switch.
switch.
Displays the range of VLANs associated with the flat mode Common
and Internal Spanning Tree (CIST) instance.
and Internal Spanning Tree (CIST) instance.
Displays the range of VLANs associated with the specified Multiple
Spanning Tree Instance (MSTI).
Spanning Tree Instance (MSTI).
Displays the Multiple Spanning Tree Instance (MSTI) that is associated
to the specified VLAN.
to the specified VLAN.
Displays a summary of Spanning Tree connection information and
instance associations for the specified port or a link aggregate of ports.
instance associations for the specified port or a link aggregate of ports.