Alcatel-Lucent 6850-48 Network Guide
BFD Application Example
Configuring BFD
page 30-30
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
• To verify the configured BFD status on routers, use the
command. This command
shows the protocols registered for BFS (OSPF in example network) and the parameter values for the
transmit, receive, and echo intervals, the multiplier number, and the operational mode.
transmit, receive, and echo intervals, the multiplier number, and the operational mode.
• To check the BFD status on all interfaces, use the
command. This
command displays the interfaces participating in the BFD sessions, the IP addresses associated with the
interface, and respective BFD session parameters.
interface, and respective BFD session parameters.
• To check the BFD status on an individual interface, use the
command
along with the interface name.
• To display information about BFD sessions, use the
command.
command. This command is
also used to check the general OSPF configuration. For OSPF interfaces, use the
command.