Alcatel-Lucent 6850-48 Network Guide
AVLAN Configuration Overview
Configuring Authenticated VLANs
page 36-6
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
6 Enable authentication by specifying the authentication mode (single mode or multiple mode) and the
server. Use the RADIUS or LDAP server name(s) configured in step 5. For example:
server. Use the RADIUS or LDAP server name(s) configured in step 5. For example:
-> aaa authentication vlan single-mode rad1 rad2
7 Set up an accounting server (for RADIUS or LDAP) for authentication sessions.
-> aaa accounting vlan rad3 local
Note. Verify the authentication server configuration by entering the
command or verify the accounting server configuration by entering the
command. For example:
-> show aaa authentication vlan
All authenticated vlans
1rst authentication server
= rad1,
2nd authentication server
= ldap2
-> show aaa accounting vlan
All authenticated vlans
1rst authentication server
= rad3,
2nd authentication server
= local
For more information about these commands, see the OmniSwitch CLI Reference Guide.