Alcatel-Lucent 6850-48 Network Guide
Configuring QoS
QoS Defaults
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
page 40-11
QoS Port Defaults
Use the
Policy Rule Defaults
The following are defaults for the
command:
Description
Command/keyword
Default
The default 802.1p value inserted
into packets received on
untrusted ports.
into packets received on
untrusted ports.
0
The default DSCP value inserted
into packets received on
untrusted ports.
into packets received on
untrusted ports.
0
Whether the port uses strict prior-
ity or weighted fair queuing.
ity or weighted fair queuing.
strict priority queuing
The default minimum/maximum
bandwidth for each of the eight
CoS queues per port.
(Not supported on the
OmniSwitch 6800.)
bandwidth for each of the eight
CoS queues per port.
(Not supported on the
OmniSwitch 6800.)
minimum = best effort
maximum = port bandwidth
maximum = port bandwidth
Whether the port is trusted or
untrusted
untrusted
802.1Q and mobile ports are
always trusted; other ports are
untrusted
always trusted; other ports are
untrusted
The maximum egress bandwidth
port bandwidth
The maximum ingress bandwidth
port bandwidth
Description
Keyword
Default
Policy rule enabled or disabled
enable | disable
enabled
Determines the order in which
rules are searched
rules are searched
precedence
0
Whether the rule is saved to flash
immediately
immediately
save
enabled
Whether messages about flows
that match the rule are logged.
that match the rule are logged.
log
no
How often to check for matching
flow messages.
flow messages.
log interval
60 seconds
Whether to count bytes or pack-
ets that match the rule.
(Only packets are counted on the
OmniSwitch 6800.)
ets that match the rule.
(Only packets are counted on the
OmniSwitch 6800.)
count
packets are counted