Alcatel-Lucent 6850-48 Network Guide
Learned Port Security Specifications
Configuring Learned Port Security
page 3-2
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
Learned Port Security Specifications
Learned Port Security Defaults
RFCs supported
Not applicable at this time.
IEEE Standards supported
Not applicable at this time.
Platforms Supported
OmniSwitch 6400, 6800, 6850, 6855, and 9000
Ports eligible for Learned Port Security
Ethernet and gigabit Ethernet ports (fixed, mobile,
802.1Q tagged, and authenticated ports).
802.1Q tagged, and authenticated ports).
Ports not eligible for Learned Port Security
Link aggregate ports.
802.1Q (trunked) link aggregate ports.
802.1Q (trunked) link aggregate ports.
Minimum number of learned MAC addresses
allowed per port
allowed per port
1
Maximum number of learned MAC addresses
allowed per port
allowed per port
100
Maximum number of configurable MAC address
ranges per LPS port
ranges per LPS port
1
Maximum number of learned MAC addresses per
switch
switch
16K
Parameter Description
Command
Default
LPS status for a port.
disabled
Number of learned MAC addresses
allowed on an LPS port.
allowed on an LPS port.
1
Maximum number of filtered MAC
addresses that the LPS port can
learn.
addresses that the LPS port can
learn.
5
Source learning time limit.
disabled
Configured MAC addresses per LPS
port.
port.
none
MAC address range per LPS port.
00:00:00:00:00:00–
ff:ff:ff:ff:ff:ff
ff:ff:ff:ff:ff:ff
LPS port violation mode.
restrict
Number of bridged MAC addresses
learned before a trap is sent.
learned before a trap is sent.
5