Alcatel-Lucent 6850-48 Network Guide
ACLMAN Modes and Commands
Using ACL Manager
page 39-8
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
ACLMAN Modes and Commands
The ACLMAN interactive shell supports a limited subset of common industry ACL syntax necessary to
create Alcatel-Lucent ACLs. In line with industry command line interfaces, the ACLMAN shell provides
the following command modes:
create Alcatel-Lucent ACLs. In line with industry command line interfaces, the ACLMAN shell provides
the following command modes:
• Privileged Exec Mode
• Global Configuration Mode
• Interface Configuration Mode
• Access List Configuration Mode
• Time Range Configuration Mode
Privileged Exec Mode Commands
Upon entering the interactive shell the Privileged Exec mode is automatically active. At this point the
following commands are available:
following commands are available:
The Privileged Exec mode also includes the following commands that are specific to the Alcatel-Lucent
implementation of ACLMAN:
implementation of ACLMAN:
Command
Description
clear access-list counters [name | number]
Resets the statistics counters to zero for the specified ACL.
If an ACL name or number is not entered, then the counters
for all ACLs are reset.
If an ACL name or number is not entered, then the counters
for all ACLs are reset.
configure replace
Clears the entire running configuration out of memory and
replaces it with the contents of the aclman.cfg file.
replaces it with the contents of the aclman.cfg file.
configure terminal
Accesses the Global Configuration command mode. Com-
mand prompt changes to Aclman (config)#
mand prompt changes to Aclman (config)#
exit
Closes the ACLMAN interactive shell and returns to the
Alcatel-Lucent CLI. The ACLMAN shell is no longer
active.
Alcatel-Lucent CLI. The ACLMAN shell is no longer
active.
show access-lists [name | number]
Displays the contents of the specified ACLs. If an ACL
name or number is not entered, all ACLs are shown.
name or number is not entered, all ACLs are shown.
show ip interface [type slot/port]
Displays ACLs associated with the specified interface. If an
interface is not specified, all configured interfaces are
shown.
interface is not specified, all configured interfaces are
shown.
show running-config
Displays the entire ACLMAN configuration, not just the
ACL configuration.
ACL configuration.
show time-range [name]
Displays the specified time range. If no name is specified,
all time ranges are shown.
all time ranges are shown.
Command
Description
import filename
Imports ACL syntax from the specified text file.
logging-rate seconds
Configures the logging rate time interval. The range is 0
to 3600 seconds. The default value is 30 seconds.
to 3600 seconds. The default value is 30 seconds.