Alcatel-Lucent 6850-48 Reference Guide

MPLS LDP Commands

page 24-4

OmniSwitch CLI Reference Guide

Configures LDP support on the specified IP interface. 

configure router ldp interface-parameters interface ip-intf-name 

configure router ldp interface-parameters no interface ip-intf-name

The name of an existing IP interface.

By default, the LDP interface is administratively enabled when the interface is created.

OmniSwitch 9000E

• Use the no form of this command to remove the LDP configuration from the IP interface. Disable the 

administrative status of the interface before attempting to remove it.

• The IP interface name specified with this command must already exist in the router configuration.

• Until LDP support is configured on an IP interface, no other LDP configuration tasks are allowed on 

that interface.

-> configure router ldp interface-parameters interface vlan-14

-> configure router ldp interface-parameters no interface vlan-14

Release 6.4.2; command was introduced.

Configures the administrative status for the specified LDP interface.

Displays the LDP interface configuration for the router.

Displays global LDP parameter values for the router.