Alcatel-Lucent 6850-48 Reference Guide
MPLS LDP Commands
OmniSwitch CLI Reference Guide
September 2009
page 24-39
show router ldp bindings ingress-label
Displays ingress LDP bindings for a specific label number or for a range of label numbers.
show router ldp bindings ingress-label start-label [end-label]
Syntax Definitions
start-label
The ingress label number to display. The valid range is 16–1048575.
end-label
The last ingress label number in a range of labels to display. The valid
range is 17–1048575.
range is 17–1048575.
Defaults
By default, all ingress LDP bindings starting with the specified label number are displayed
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the optional end-label parameter along with the start-label parameter to specify a range of ingress
label bindings to display.
• If an ending label number is not specified, then all ingress label bindings beginning with the starting
label number forward are displayed. No range is specified.
Examples
->show router ldp bindings ingress-label 131068
LDP LSR ID: 10.11.0.6
Legend: U = Label In Use, N = Label Not In Use, W = Label Withdrawn,
S = Status Signaled Up, D = Status Signaled Down,
R = VPRN Service, V = VPLS Service, W = VPWS Service
TLV = (Type, Length: Value)
LDP Prefix Bindings
Prefix Peer IngLbl EgrLbl EgrIntf EgrNextHop
------------------+---------------+-------+------+-------------+---------------
No Matching Entries Found
LDP Service FEC 128 Bindings
Type VCId SvcId SDPId Peer IngLbl EgrLbl LMTU RMTU
------+----------+----------+------+---------------+-------+-------+-----+-----
V-Eth 100 100 10 10.11.0.66 131068U 131068 1500 1500
No. of VC Labels: 1
LDP Service FEC 129 Bindings
AGI SAII TAII
Type SvcId SDPId Peer IngLbl EgrLbl LMTU RMTU