Alcatel-Lucent 6850-48 Reference Guide

802.1AB Commands

OmniSwitch CLI Reference Guide

page 27-15

Specifies the switch to control per port 802.3 TLVs to be incorporated in the LLDPDUs.

lldp {slot/port | slot | chassis} tlv dot3 mac-phy {enable | disable}

Slot number for the module and physical port number on that module 
(e.g., 3/1 specifies port 1 on slot 3).

The slot number for a specific module.

Enables 802.3 TLV LLDPDU transmission.

Disables 802.3 TLV LLDPDU transmission.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• The LLDPDU must be enabled and set to transmit before using this command. 

• If this command is applied to a slot or chassis, then the existing configuration related to this command 

will be lost.

-> lldp 2/4 tlv dot3 mac-phy enable

-> lldp 2 tlv dot3 mac-phy disable

Release 6.3.1; command was introduced.