Alcatel-Lucent 6850-48 Reference Guide
Ethernet OAM Commands
OmniSwitch CLI Reference Guide
September 2009
page 28-5
ethoam domain mhf
Modifies the Message Handling Function (MHF) value of an Ethernet domain.
ethoam domain {domain_name | mac_address} mhf {none | explicit | default}
Syntax Definitions
domain_name
Domain name of the Ethernet domain. The length of the domain name
varies depending on its format.
varies depending on its format.
mac_address
Specifies the CFM system MAC address.
none
Specifies that no MHFs can be created for the specified VLAN ID.
explicit
Specifies that MHFs can be created for the specified VLAN ID only on
Bridge ports through which this VLAN ID can pass and only if a Main-
tenance End Point (MEP) is created at a lower MD level.
Bridge ports through which this VLAN ID can pass and only if a Main-
tenance End Point (MEP) is created at a lower MD level.
default
Specifies that MHFs can be created on the specified VLAN ID on any
Bridge port through which this VLAN ID can pass.
Bridge port through which this VLAN ID can pass.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
The domain_name should be unique amid all those used by or available to the service provider.
Examples
-> ethoam domain esd.alcatel-lucent.com mhf explicit
Release History
Release 6.3.1; command was introduced.
parameter
default
none | explicit | default
none