Alcatel-Lucent 6850-48 Reference Guide

IP Commands

page 32-90

OmniSwitch CLI Reference Guide

Sets whether the switch generates SNMP DoS traps when an attack is detected.

Enables the generation of DoS traps.

Disables the generation of DoS traps.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

This command controls whether the switch generates an SNMP trap when a DoS attack is detected. It is 
assumed a DoS attack has occurred when the port scan penalty threshold is exceeded. This value is set 
using the 

 command.

-> ip dos trap enable

-> ip dos trap disable

Release 6.1; command was introduced.

alaDoSConfig

alaDoSTrapCnt1

Sets the threshold for the port scan value, at which a DoS attack is 
recorded.

Displays the configuration parameters of the DoS scan for the 
switch.