Alcatel-Lucent 6850-48 Reference Guide
IPv6 Commands
OmniSwitch CLI Reference Guide
September 2009
page 33-51
Examples
-> show ipv6 router database
Legend: + indicates routes in use
Total IPRM IPv6 routes: 5
Destination/Prefix Gateway Address Interface Protocol Metric
-------------------+-------------------------+-----------------+---------+-------
::/0 2002:d468:8a89::137 v6if-6to4-137 Static 1
137:35:35::/64 fe80::2d0:95ff:fe12:f470 v6if-tunnel-137 OSPF 2
195:35::/64 fe80::2d0:95ff:fe12:f470 v6if-to-eagle OSPF 2
212:95:5::/64 fe80::2d0:95ff:fe12:f470 smbif-5 Local 1
2002::/16 2002:d423:2323::35 v6if-6to4-137 Local 1
Inactive Static Routes:
VLAN Destination/Prefix Gateway Address Metric
-----+-------------------+-------------------------+-------
1510 212:95:5::/64 fe80::2d0:95ff:fe6a:f458 1
Release History
Release 6.1.3; command was introduced.
Related Commands
output definitions
Destination/Prefix
IPv6 destination address and prefix.
Gateway Address
IPv6 address of the gateway used to reach the destination network.
Interface
The device the interface is using (e.g., VLAN 6to4tunnel); or loopback.
Protocol
Protocol by which this IPv6 address was learned: LOCAL, STATIC,
OSPF, RIP, BGP).
OSPF, RIP, BGP).
Metric
RIP metric or cost (hop count) for the route. Indicates a priority for the
route. The lower the metric value, the higher the priority.
route. The lower the metric value, the higher the priority.
VLAN
The VLAN on which the route was learned, not forwarded. Note that
N/A appears in this field for static routes as they are not learned on a
VLAN.
N/A appears in this field for static routes as they are not learned on a
VLAN.
Displays the IPv6 Forwarding Table.