Alcatel-Lucent 6850-48 Reference Guide

IPv6 Commands

OmniSwitch CLI Reference Guide

September 2009

page 33-93

show ipv6 rip peer

Displays a summary of the observed RIPng peers, or specific information about a peer when a peer
address is provided.

show ipv6 rip peer [ipv6_addresss]

Syntax Definitions

ipv6_addresss

IPv6 address of the peer.

Defaults

N/A.

Platforms Supported

OmniSwitch 6400, 6850, 6855, 9000, 9000E

Usage Guidelines

If you do not specify a peer, all IPv6 RIP peers are displayed.

Examples

-> show ipv6 peer

Seen on Packets Last

Address Interface Recv Update

-----------------------------+-------------+--------+----------

fe80::200:39ff:fe1f:710c vlan172 23 20

fe80::2d0:95ff:fe12:da40 bkbone20 33 2

fe80::2d0:95ff:fe12:da40 vlan150 26 25

fe80::2d0:95ff:fe6a:5d41 nssa23 20 25

-> show ipv6 rip peer fe80::2d0:95ff:fe12:da40

Peer#1 address = fe80::2d0:95ff:fe12:da40,

Seen on interface = bkbone20,

Last Update = 8 secs,

Received packets = 33,

Received bad packets = 0

Received routes = 5,

Received bad routes = 0

Peer#2 address = fe80::2d0:95ff:fe12:da40,

Seen on interface = vlan150,

Last Update = 1 secs,

Received packets = 27,

Received bad packets = 0

Received routes = 2,

Received bad routes = 0