Alcatel-Lucent 6850-48 Reference Guide
RIP Commands
page 37-20
OmniSwitch CLI Reference Guide
September 2009
ip rip invalid-timer
Configures the RIP invalid timer value that defines the time interval during which a route will remain
active in Routing Information Base (RIB) before moving to the invalid state.
active in Routing Information Base (RIB) before moving to the invalid state.
ip rip invalid-timer seconds
Syntax Definition
seconds
The RIP invalid timer value, in seconds. The valid range is 3–360.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
The invalid time interval value must be three times the update interval value.
Examples
-> ip rip invalid-timer 270
Release History
Release 6.1.5; command was introduced.
Related Commands
MIB Objects
alaProtocolRip
alaRipInvalidTimer
parameter
default
seconds
180
Displays the RIP status and general configuration parameters (e.g.,
forced hold-down timer).
forced hold-down timer).